The COMFORT-FRAME bed frame 80x200 is a modern solution that provides comfort and convenience during sleep, ideal for those looking for high-quality support for their mattress.
Advantages of our bed frame:
-
The frame is made of layered hardwood, designed for slats that carry heavy loads.
-
28 springy birch slats, mounted on the side frame of the bed frame.
-
Flexible mounts fixed on dowels provide excellent cushioning and eliminate dead zones along the frame.
-
Hardness Adjustment Zone (SRT) with sliders (6 slats) – allows you to adjust the firmness in the lumbar region of the frame to your individual needs, enhancing your comfort during rest.
-
Equipped with a central tape that strengthens the frame, optimizing the alignment of your body and the even distribution of weight.
-
The vertical frame structure, with a height of about 9 cm, perfectly transfers loads and is recommended for beds with traditional height frames.
-
The frame is made of layered birch veneer, finished with a decorative FINISH foil.
-
Manufactured by a Polish producer.
Specification:
-
Made of 28 springy slats, each 35 mm wide.
-
The spacing between the slats is approximately 3.5 cm.
-
Height of the frame: 9 cm.
-
Double mounts for additional stability.
-
Stable frame construction.
-
The frame is screwed together for added durability.
-
Additional adjustment in the lumbar region (SRT) for personalized comfort.
-
A belt optimizing weight distribution.
-
Easy assembly by the user.
-
Aesthetic finish.
-
Maximum load capacity: 110 kg.
The frame requires support along the entire length of the side slats, and in the case of a two-section frame, also along the entire length of the central section.
Additional information:
The actual length of the proposed frames is shorter by 4 cm, so for the standard length of 200 cm, it is 196 cm with a tolerance of (+/- 2mm). The actual width is approximately 1 cm narrower. The frame is for self-assembly and is delivered in a package along with instructions.
